Monthly Archives: September 2019

PSD2 compliant payment gateway

Posted on by
Reply

Need a payment gateway that supports Strong Customer Authentication (SCA) requirements for the EU Payment Services Directive (PSD2)? The EU requirements went into effect September 14, 2019 and like many new regulatory and card acceptance rules changes, some payment gateways are ready, some are not, and some may never get updated. This article addresses online payments and ecommerce transactions only.

Do US companies with a US merchant accounts need to comply with PSD2?

It depends. This is hard to decipher when researching, but the key is, yes must comply if a transaction even ‘passes through’ the EU.

  • One leg out (OLO) transactions in any currency (where one of the Payment Service Providers (PSPs) is located inside the EEA and the other PSP is located outside the EEA). For example, a transaction involving US merchant account and an EU card issuer is one leg out and exempt from SCA.

How does PSD2 Strong Cardholder Authentication impact US merchants?

  • It’s not required for Ecommerce transactions from EU cardholders to US merchants with US merchant accounts.
  • US merchants may experience increased issuer declines if not using SCA.
  • US merchants will likely experience increased fraud as the pool of web sites shrinks where criminals can commit fraud and get away with it.
  • GDPR regulations for ecommerce transactions from EU cardholders to US merchants with US merchant accounts does apply; choose payment gateways that support both GDPR and 3DS v2.2.0 for maximum compliance and protection.

Which online payments are exempt from PSD2?

  • Commercial cards where there is no cardholder name, and thus no way to authenticate an individual.
  • Recurring transactions for the same amount- PSD 2 applies for the initial transaction. If the amount changes, PSD 2 applies. PSD 2 applies for Unscheduled Credential On File for each transaction unless cardholder whitelists as per next item.
  • White-lists of trusted beneficiaries- cardholders can notify their issuer to allow payments to go through without SCA after initial transaction.
  • Transactions under $30.

How can merchants get compliant with PSD2?

Merchants should use a payment gateway that supports 3DS v2.2.0, which supports Strong Customer Authentication or SCA. Visa specifically states in their rules (Table 5-17: Acquirer Support of Visa Secure by Region/Country – Requirements) that acquirers in the EU must process transactions using Visa Secure, which is their version of 3D Secure, a global protocol for securing card not present transactions. Only 3D Secure 2.x, not 1.0, meets the PSD2 requirements, with v2.2.0 being the most current as of this writing. This will get merchants compliant with PSD2.

Which payment gateways support 3DS v2.2.0?

Because the payment gateway may be one of multiple components in the checkout process it may not be on a certification list. One popular payment gateway apparently is not being updated- Authorize.net; users are advised to upgrade to Cybersource per the Cybersource link in resources below.

Historically, Europe rolls out tougher rules first and then the US. Merchants can expect SCA to be a US requirement in the future.

Want a GDPR and 3DS v2.2.0 compliant payment gateway for your business? Contact us for solutions.

Resources:

DISCLAIMER: condensed and incomplete information! Information may be quickly outdated.

Want a GDPR and 3DS v2.2.0 compliant payment gateway for your business? Call Christine Speedy, 954-942-0483, 9-5 ET.

EMVCo launches EMV® 3-D Secure 2.2.0 Testing Programme

Posted on by
Reply

EMVCo has announced the publication of the EMV 3-D Secure Protocol and Core Functions Specification v2.2.0.

14 December 2018 – EMVCo today announces the publication of the EMV® 3-D Secure Protocol and Core Functions Specification v2.2.0. The updated specification includes enhancements to promote an optimised consumer experience while supporting new authentication channels when making e-commerce transactions.

EMV 3DS is a messaging protocol that promotes frictionless consumer authentication and enables consumers to authenticate themselves with their card issuer when making card-not-present (CNP) ecommerce purchases. The additional security layer helps prevent unauthorised CNP transactions and protect the merchant from exposure to CNP fraud.

Version 2.2.0 builds upon the current specification version 2.1.0 which is available on the EMV 3DS Test Platform, enabling 3DS product providers to confirm that their solutions will perform in accordance with the specification. Support of v2.1.0 is required in order to implement v2.2.0. Key updates within version 2.2.0 include:

  • Improved communication between merchants and issuers, enabling Europe’s Second Payment Services Directive (PSD2) exemptions for Strong Consumer Authentication to be applied.
  • Two new features to enable authentication for various payment scenarios including mail order and telephone order transactions: 3DS Requestor Initiated (3RI) payments and decoupled authentication – allowing cardholder authentication to occur even if the cardholder is offline.
  • Expansion of existing data elements to promote communication of pre-checkout authentication events and associated data as part of the EMV 3DS transaction from systems such as those supporting the FIDO Alliance standards.

These enhancements are available if all 3DS components involved in the transaction have updated their software to support v2.2.0.

“EMV 3DS exists to promote secure, consistent consumer authentication for e-commerce transactions across all channels and connected devices, while optimising the cardholder’s experience,” comments Stephanie Ericksen, Chair of the EMVCo Executive Committee. “Our work in this area continues to evolve to ensure we respond to new marketplace requirements. EMVCo continues to encourage the payments community to get involved and provide feedback on the EMV 3DS activity.”

Earlier this year EMVCo announced the availability of the full EMV 3DS Test Platform, which enables the functional testing of EMV 3DS solutions. Letters of Approval are currently being issued for those 3DS products that have successfully tested against version 2.1.0. A list of approved products can be found on the EMVCo website. Products submitted for EMV 3DS v2.2.0 compliance testing will also be tested against EMV 3DS v2.1.0 to receive an EMV 3DS v2.2.0 Letter of Approval. Testing support for version 2.2.0 is expected to be available mid-2019. Progress updates will be posted on the EMVCo website.
To stay informed of the latest EMVCo developments and receive advanced access to EMV Specifications and related documents, join the EMVCo Associates Programme or become a Subscriber.

American Express SafeKey for hotels

Posted on by
Reply

Direct from American Express hospitality industry webinar, hotels number one protection from card not present fraud is American Express SafeKey®. SafeKey leverages the global industry standard, 3-D Secure®*, to detect and reduce online fraud by adding an extra layer of security when Card Members pay online.

How to mitigate 3rd party authorization chargeback risk? Merchant best practices:

  • Ensure the cardholder participated in the initial transactions. Safekey is the best method to prove that, making signatures irrelevant.
  • Get written authorization of what expenses the cardholder will allow.
  • Put cardholder name on the folio.
  • Show where cardholder opted in to all policies, including damages, cancellation etc.
  • Authorization must be CARD NOT PRESENT.
  • Use solution that includes cardholder name in the authorization response; retrievable record.

American Express SafeKey

How does Amex SafeKey impact the customer shopping experience? The cardholder may have some or no difference in the checkout experience, based on many factors, including prior online shopping history. The cardholder may be asked authentication question(s) to confirm it’s really the cardholder.

How does Amex SafeKey impact merchants?

  • Fraud liability for “It wasn’t me, I didn’t authorize it” goes away as liability shifts back to the issuer.
  • For business to business, where cardholder billing and shipping address frequently vary, cardholder authentication plays an important role not available with four digit CID security code validation only.
  • At this writing, American Express merchants do not receive a specific interchange discount as may be available with other card brands.

How can merchants adopt the Amex SafeKey service?

  1. Enroll your company on the American Express web site. https://network.americanexpress.com/globalnetwork/safekey/us/en/merchants-acquirers
  2. Receive e-mail from SafeKey Certification Team with your SafeKey ID and next steps.
  3. SafeKey Certification Team gets approval from Acquirer.
  4. Acquirer and SafeKey Certification Team complete required setup.
  5. Activate 3-D Secure on the application. (Ecommerce shopping cart, payment gateway, or ERP.) Both payment gateway and application must support the service.

* 3-D Secure is a registered trademark of Visa International Service Association in the United States and other countries.

Want to add American Express SafeKey to your business and get a great third party authorization form solution all included? Contact CenPOS global sales and integrations reseller, Christine Speedy, 954-942-0483 for more information.